• “RBS” Horizontal Autoclave High Speed Steam Sterilizer Fully Automatic Rectangular -made SS 304 with electric load 18kw digital time and temperature controller also.
• Fitted with Microprocessor Based Fully Automatic Fuzzy Logic Control System with Alphanumeric Digital backlit LCD display with Set Value (SV) and Process Value (PV).
• Unit is fitted with water level indicator, safety valve, pressure gauge, water inlet and drain valves.
• Unit is also fitted with low-water level cut-off device and automatic pressure control device.
• All “RBS” rectangular sterilizes are fitted with SELF LOCKING SAFETY DOOR device.
• The door cannot be opened when chamber is under pressure.
• Two separate valves are provided for evacuating steam from inner chamber and jacket, as and when desired.
• Fitted with safety valve as a safety device.
• Drain valve is fitted at the side bottom for easy draining/cleaning.
• Fitted with vacuum breaker to break vacuum in case of formation of vacuum due to steam condensation.
• Triple Walled with Steam Jacket and Separate Boiler. Sterilization cycle is controlled by Multiport Valve. The unit is fitted with all standard accessories.
• PLC feature : Automatic features (steam in, steam out, vacuum & pre vacuum)
• Vacuum Pump : high water ring Kirloskar 3 hp pump for high vacuum
• Water Fill up pump : for fill water automatically with motor cromptan 1 hp

WORKING CYCLE

• Available in three cycle types
• Standard speed working pressure (121°C)
• High speed working pressure (134°C) (1.2 kg) to (2.5 kg)
• As per your requirement

TEST MODE

• Leak Test Mode
• Vacuum Leak Test
• Chemical Indicators
• Biological Indicators
• The bowie-dick test
• (All feature can be controlled by manual mode also)

CONSTRUCTIONS SPECIFICATIONS

• Inner Chamber : Built with AISI 304 grade 6 mm stainless steel
• Jacket : Built with AISI 304 grade 6 mm stainless steel
• Boiler Tank : Built with AISI 304 grade 4 mm stainless steel
• Heavy Duty Stand : Built with AISI 304 grade 10 gauge stainless steel
• All pipe line makes : Built with AISI 304 grade 16 gauge stainless steel
• Outer Cover : Built with AISI 304 grade 1.5 mm stainless steel
• Main Door : Heavy duty jointless SS-304 grade 10 mm
• Back Sheet (Chamber) : Heavy duty jointless SS-304 grade 8 mm
• Strong Argon arc welded : For greater durability
• Double Door : Optional

SAFETY FEATURES

• Self-locking Safety Door Gasket : Under pressure and heat resistant SILICON door gasket.
• Water Level Gauge Glass : Show water level with sensor
• Spring Safety Valves : In jacket for over pressure protection.
• Wight Safety Valve : In jacket for over pressure protection.
• Pressure Switch : For power consumptions. And pressure cut off
• Low Water Protection : To protect electric heaters.
• Earth Safety System : For safety of operator and machine
• Steam Deflector : For better vacuum and dryness
• Air Vent / Steam Trap : Moisture trap
• Pressure Gauge : For show of steam pressure jacket
• Compound Gauge : To show of chamber steam pressure and vacuum
• Operating System : Control by plc and operate by solenoid valve
• Alarm System : After the process complete buzzer system
• Display : Show steam pressure/ date /time /temp. & vacuum
• Insulation : High heat proof glass wool
• Printer : Sterilization cycle with date, time, pressure and temperature

COMPLIES WITH FOLLOWINGS : NABH TEST PASS

• THE BOWIE-DICK TEST is a standard operational test by which hospitals and laboratories can demonstrate proper air removal from their pre-vacuum autoclave chamber. It is primarily useful for testing pre-vacuum cycles that are sterilizing wrapped goods or packs.
• BIOLOGICAL INDICATORS (WITHIN A PCD) are often used for routine monitoring, qualification and load monitoring of a steam sterilizer. Biological indicators are designed to demonstrate whether the conditions during a steam (autoclave) cycle were adequate to achieve a defined level of microbial inactivation
• THE VACUUM LEAK TEST is used to determine the air-tight integrity of a pre vacuum autoclave’s chamber and plumbing system. This test exposes the autoclave’s plumbing and components to vacuum conditions and measures how much vacuum depth was lost over a given period of time.
• CHEMICAL INDICATORS are used to monitor whether the parameters to achieve sterilization have been met for a specific sterilization process, such as steam or vaporized hydrogen peroxide sterilization.

Option

• Automatic water feed system can be incorporated in the boiler, so that at higher level it switched off the water pump and restart it at lower level automatically.
• Vacuum pulsing through a closed coupled water ring high vacuum pump for creating forced vacuum and fast drying process.
• TFT Touch Screen Display Controller in lieu of LED /LCD Controller.
• Printer Port to cost extra.